Traffic Separators - modified SRM44, 90, 180
A modified traffic separator block is used to organize vehicles in parking lots, physically block off the traffic blind spot on the roadway, and separate traffic lanes. It limits the overrun of vehicle wheels outside the designated area. Installation of the parking stop is carried out with the use of anchors directly to the road surface for permanent or temporary period, it does not require special surface preparation. The standard color of this separator is black, we offer application of reflective tape in white or yellow. Modified separators are available in three lengths: 44cm with 2 mounting elements, 90cm with 3 mounting elements, and 180cm with 6 mounting elements. The 180cm long separator consists of two pieces of 90cm elements, connected together by “back pressing”, which ensures a solid assembly and does not generate additional transport costs (additional length costs).
National Technical Assessment
Nr IBDiM-KOT-2018/0132 wydanie 3
Separatory ruchu ciągłe i punktowe z tworzyw sztucznych
06.04.2018r. - 06.04.2028r
3D models at the bottom of the page!
Dimension L x W x H (mm)
Maximum quantity on 1 pallet*
Traffic separators - modified 44
440 x 150 x 105
Traffic separators - modified 90
900 x 150 x 105
Traffic separators - modified 180
1800 x 150 x 105
Please be advised that the above 3D models are only illustrative models and do not reflect the actual products manufactured by FH Olimpia.